Submissions

Online Submissions

Already have a Username/Password for International Journal of Chemical and Analytical Science?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

Author Guidelines

Notice to Authors

The Notice to Authors is also provided as a wording

Licence to publish

For details regarding copyright see the form

Open access : paper are Open Access on payment of a publication fee

Scope and publishing policy

International Journal of Chemical and Analytical Science (IJCAS) publishes research papers from all fields of chemical science. Papers that are multidisciplinary or address new or emerging areas of chemistry are particularly encouraged. Thus, the scope is dynamic. It includes (but is not limited to) synthesis, structure, mechanism, theory, new materials, macromolecules and polymers, supramolecular chemistry, analytical and environmental chemistry, natural products, biological and medicinal chemistry, nanotechnology, and surface chemistry.

The journal appears 12 times per year on the web, the web version being updated more frequently

The publishing policy of International Journal of Chemical and Analytical Science (IJCAS) is to select the most important papers with the broadest significance to the wider chemistry community. Papers reporting incremental results that do not have sufficient originality and significance are unlikely to be accepted.

Submission of manuscripts - author´s overview

International Journal of Chemical and Analytical Science (IJCAS) is a general chemistry journal with a broad readership. 80% of the journal´s subscribers are outside India. Each manuscript should include a general introduction that allows all readers to appreciate the significance and general context of the work, along with a final paragraph summarizing the conclusions that can be drawn, and noting possible future directions.

All manuscripts for International Journal of Chemical and Analytical Science (IJCAS) should be submitted as a single file containing schemes, figures, and tables embedded in the text. The covering letter should contain a justification explaining the significance of the work to the general chemical and analytical community. The covering letter should also contain a statement that the manuscript has not been published elsewhere, and is being submitted exclusively to International Journal of Chemical and Analytical Science (IJCAS).

Manuscript categories

Full Papers

Full papers are complete reports of original research results that have not previously been published, except in the form of a Communication, in which case a reprint should be provided. A full paper will not be published if all relevant experimental details have already been published as supporting information in a Communication elsewhere. Evidence must be given that substantial new material is submitted, and the Communication must be identified and cited early in the manuscript. A short abstract (maximum 100 words) should be provided at the start of the manuscript. The paper should be divided into Introduction, Results and Discussion, Conclusion, and Experimental (and/or Computational Methods) sections.

Communications

Communications are short reports of urgent research findings, and should not exceed 2000 words and three graphics. A short abstract (50-100 words) should be provided at the start of the manuscript. The text should not otherwise be broken up into sections; however, an introductory paragraph should provide a general context for the work, explaining its significance, and indicating why it should be of interest to chemists in other areas, while the final paragraph should summarize the major conclusions that can be drawn, pointing to possible future directions. A short Experimental section should be included. Adequate experimental details, including full characterization of new compounds, should be given as supporting information in the Accessory publication. The submission should be accompanied by a brief statement explaining why urgent publication is merited.

Reviews

Review articles are usually not more than 10 printed pages and should give a critical overview of a subject of high current interest in chemical science. Authors are encouraged to take a stance and lead the reader through the field. Overall a review should take us forward and show where a field is heading. The introduction should arouse the reader´s interest, describing the background, significance, and development of the field, and should be comprehensible to a broad audience. The main part of the review should be a comprehensive but critical analysis of recent (last three to five years) developments, current problems, and future directions. The review should conclude with a summary of the highlights (pointing out their significance) and unsolved problems. A passport photo and a short biography (ca. 100 words) should be submitted with the manuscript.

Highlights

Highlight articles summarize recent developments in a new, developing, controversial, or speculative field of chemistry, and are intended to serve as an introduction to the field for the general reader. A short abstract should be provided at the start of the manuscript. A strong introduction describing the significance of the work and the reason for recent heightened interest should be followed by a clear and succinct presentation of important results, without the extensive technical details required for an original article or the extensive history required for a review. The conclusion should highlight the significance of the findings and describe how they take us forward, and it should point to possible future directions. All of this should be presented in a manuscript of up to 2000 words.

Focus

Focus articles are brief (1-2 published pages) accounts reporting on a new reagent, technique (e.g. particle or film preparation), or analytical/imaging method (microscopy, spectroscopy) etc. The article consists of an introduction to the reagent/technique and a discussion of its significance, to how it is prepared/used, and why it represents an advance on previous reagents/methods. This is followed by single-paragraph summaries (with graphics) of recent reports of its usage. A brief biography (approximately 60 words) and a photo of the author should be submitted with the article. The total length of the article should not be greater than 600 words.

Manuscript preparation

Order: The sections of a manuscript should appear as follows:

Title, Authors and Addresses, Abstract & Key words

Introduction

Results and Discussion (can be separate)

Conclusion

Experimental (and/or Computational Methods)

References

Title

The title should be succinct and no longer than ten words. The title should capture important keywords.

Authors and addresses

The full names of all authors contributing to the work should be included, along with their complete postal addresses. Email address(es) of the contact author(s) must be included. The addresses listed should be the institution(s) where the work was conducted; if this is different from the present address, the present address should be indicated in a footnote.

Abstract

This should state concisely the scope of the work and the principal findings in no more than 150 words. Abstracts are not published for Focus articles.

Key words: 5-6 words

Text

Every manuscript (except Focus articles) should contain introductory and concluding paragraphs written in a general style that will allow the main points to be appreciated by a broad audience of readers across the chemical sciences. Robert Schoenfeld´s book The Chemist´s English (Wiley-VCH: Weinheim, 1989) may be useful to intending authors. A good rule is: use clear language that drives your story forward. Authors not fully fluent in the finer points of English are urged to consult native English-speaking colleagues before submitting manuscripts. Please define acronyms on their first appearance except ones commonly understood by all chemists (such as NMR and UV-vis); when in doubt include a definition. Relevant compounds should be numbered consecutively and in boldface.

Introduction: This should provide a general context for the work, explaining its significance, and indicating why it should be of interest to chemists in other areas.

Conclusion: This should summarize the major conclusions that can be drawn, pointing out their significance, and alluding to possible future directions.

Symbols, units, and nomenclature should conform to the recommendations of the International Union of Pure and Applied Chemistry. SI units should be used for physical quantities [see IUPAC recommendations on these in the Green Book (I. Mills, T. Cvitas, K. Homann, N. Kallay, K. Kuchitsu, Quantities, Units and Symbols in Physical Chemistry, 2nd edn 1993 (Blackwell: Oxford), e.g. s for second, min for minute, etc.)]. If other units must be used, their first appearance in a paper should be followed by a footnote or parenthesis giving the conversion factor. Both IUPAC and Chemical Abstracts nomenclature are acceptable. Refer to the Blue Book [R. Panico, W. H. Powell, J.-C. Richer (Eds), A Guide to IUPAC Nomenclature of Organic Compounds 1993 (Blackwell: Oxford)] and the Red Book [G. J. Leigh, (Ed.), Nomenclature of Inorganic Chemistry 1990 (Blackwell: Oxford)] for a guide to IUPAC nomenclature.

Syntheses: should be clearly documented and logically presented, as shown in the example provided here. Physical data should be arranged, where possible, as follows: physical data (melting/boiling point — optical rotation) — spectroscopic data (IR — UV-vis — ¹H NMR — ¹³C NMR — mass spectrometry) — chemical data (combustion — elemental analysis). Spectral peaks should be listed as they read from left to right in the spectrum. The order should at least be consistent within the manuscript. The names of new compounds should appear in italics where they are first mentioned in the Experimental section. Elemental analyses should be presented as: Anal. Calc. for C₁₃H₁₃NO₄: C 63.14, H 5.30, N 5.67. Found: C 62.99, H 5.32, N 5.65% (a tolerance of 0.4% is usually acceptable). NMR data should be presented in the order chemical shift (multiplicity, coupling constant(s), integration, assignment). Coupling constants J should be given where appropriate. Indicate the machine frequency if non-routine, e.g. delta_H (500 MHz, CDCl₃) 4.07 (q, J 7.5, 2H, CH₂CH₃).

Adequate evidence to establish identity and purity of new compounds should be provided. An accurate mass measurement of a molecular ion is acceptable as evidence for chemical composition provided that independent evidence for sample purity is given. In such cases, copies of ¹H and ¹³C NMR spectra must be provided as an HPLC or GLPC chromatograms and low-resolution mass spectra under conditions that minimize fragmentation may be useful as additional evidence of purity.

Supplementary spectra and spectral assignments, e.g. 2D NMR spectra that are not needed for the general understanding of the text, may also be published .

Crystallographic data: Should broadly conform to the recommendations of the International Union of Crystallography. Prior to manuscript submission, the author should deposit data for organic and metal-organic structures with the Cambridge. The data will be assigned one CCDC deposition number per structure, which should be quoted in the manuscript. The crystallographic information (.cif) file will not be published; however, it should be submitted with the manuscript as supporting information for assessment by referees.

Tables of relevant bond lengths and angles not needed in the general discussion but of interest to the specialist may be published in the , but the full crystallographic data will not be published (e.g. atomic coordinates and anisotropic displacement parameters), as it will be available from the CCDC.

The manuscript to be published should contain a standard description of the crystal data and structure refinement in the Experimental section. This includes the chemical formula, formula mass, crystal system, space group, crystal colour, and dimensions of crystal, unit cell parameters (with standard uncertainties), data collection temperature, number of formula units in the unit cell, linear absorption coefficient, range of transmission factors, wavelength of radiation, 2 theta range, number of measured and independent reflections, number of reflections included in the refinement, goodness of fit, and final R values.

An ORTEP (or similar) diagram should be incorporated in the text. Important bond lengths and angles may be included in a table or in the figure or figure caption). If the structure if peripheral to the subject of the paper, it should be published.

Additional views or details of the structure(s), crystal packing, etc., may, when relevant, be published.

Computational results: These should aim to follow the IUPAC guidelines for reporting the results of calculations. Sufficient detail should be provided, within the manuscript to enable readers to reproduce the calculations. Necessary detail includes, for example, force-field parameters and/or equations, or references thereto, defining the model. Results describing electronic structure calculations should provide the geometries and absolute energies of all calculated structures. Where applicable, imaginary frequencies and IRC calculations should be reported to identify stable structures and transition states.

Equations and Mathematics: Equations should be numbered sequentially. Please avoid double sub- or superscripts. We recommend following the formats outlined in the Green Book (upright for constants (e, pi, i), italic for variables, bold italic for vectors and matrices).

Tables: Table numbers are designated by Arabic numerals. Tables consist of three horizontal rules, with box headings centred over each column. Material in body of table is usually justified on the left-hand side. Numerical data are usually justified on the decimal point. Footnote references within tables are superior capital letters. Footnotes appear at the bottom of the table, in the same size text as the body of the table.

Graphics: Figures and Schemes should be of sufficient quality to allow direct reproduction. Single-column (85 mm) width is preferred; double-column figures are acceptable where necessary. Numbers, letters, and symbols should be of the correct size to be 1.8 mm (8 pt) high after reduction. Images with grey tones or colour should be provided as high quality originals, and as electronic files in (ideally) TIFF, EPS, or PDF format with the highest resolution possible (at least 300 dpi). For scanned photographs ensure the resolution is at least 300 dpi and for colour images use RGB with the highest resolution possible. For colour images in the print version, authors will be asked to contribute towards the costs associated with colour printing. Authors may wish to choose to have their colour figures produced in colour in the online version of their paper, free of charge, and black and white in the print version.

All illustrations should have titles, even if there is no caption.

In ORTEP or similar diagrams, (selected) atoms should be labelled and the labelling should be consistent with all other atom numbering system used in the manuscript.

Symbols representing variables or physical quantities should be in italics.

Chemical structures should be produced using ChemDraw or ChemBioDraw , namely using standard bond angles and fixed bond lengths (wherever possible) of 0.5 cm/0.2 inches, line width 0.02 cm, bold width 0.07 cm. In general, the atom labels should be Helvetica 10 pt and compound numbers Helvetica bold 10 pt.

Accessory publications: Supporting material of a detailed nature, which is not essential in the printed paper but may be useful to other workers, may be submitted with the manuscript. (see Syntheses, Crystallographic data and Computational results). Such material will be made available on the web, and a note to this effect should be included at the end of the paper (before the Acknowledgements section).

Acknowledgements: As brief as possible, and to appear before the references.

References: References should be in the Vancouver style. Please ensure references are embedded within the manuscript and not in a referencing software program such as EndNote or ProCite. In-text references are presented numerically, superscript in square brackets, after any punctuation. Citations should appear in numerical order throughout the text, consistent with the reference list at the end of the main text body. The reference list should also have reference numbers in square brackets. Initials are listed before surnames. The penultimate and final name in the list should be separated by a comma, the final name should be followed by a comma. The journal title should be italicized, followed by the year of publication in boldface, the volume number in italics, and the page number upright. Books follow the order authors - title - editors - year, volume, chapter, page - publisher. Computer programs and patents follow essentially the same order with logical substitutions. Reference to internal publications, conference proceedings, and web pages should be avoided. For example^[5,17-20]
[5] B. H. Burroughes, D. C. C. Bradley, A. R. Brown, M. K. Mackay, R. H. Friend, P. L. Burn, Nature 1990, 347, 539.
[17] A. B. Bloggs, C. D. Smith, in Pigments in Nature, (Ed. M. E. Brown) 1996, Vol 6. Ch. 8, pp. 98-102 (Pergamon: Chicago, IL).
[18] (a) V. Andriole, The Quinolones 2000 (Academic Press: New York, NY).
(b) Fluoroquinolone Antibiotics (Eds A. R. Ronald, D. E. Low) 2003 (Birkhäuser: Basel).
[19] Xtal ver. 3.4 (Eds S. R. Hall, D. J. du Boulay, R. Olthof-Hazekamp) 2001 (University of Western Australia: Perth).
[20] L. A Marshall, K. E. Steiner, G. A. Schieser, U.S. Patent 4 889 858 1989.

Submission of manuscripts
Initial submission
To submit your paper, please use the online journal management system , which can be reached directly through this link or from the icon on the journal´s homepage. Choose International Journal of Chemical and Analytical Science (IJCAS) and use your existing username and password to log in (first-time users, log in through the New User box). Choose ‘Submit manuscript’ from the menu on the left side of the screen and then follow the 5 steps SUBMISSION, providing the information requested under each step.
A covering letter must accompany the submission and should include the name, address, fax and telephone numbers, and email address of the corresponding author. The letter should also contain a statement justifying why the work should be considered for publication in the journal, and that the manuscript has not been published elsewhere, and is being submitted exclusively to International Journal of Chemical and Analytical Science (IJCAS) .Five potential referees must be proposed. A completed signed copyright form or scanned and submitted electronically (email: admin@ijacs.info or parialcognosy@rediffmail.com) as soon as possible after submission. The manuscript number (e.g. IJCAS_10_XX) must be included on the form.
Authors are advised to consult recent issues of the journal to note details of the scope of papers, headings, tables, illustrations, style, and general form. Observance of these and the following details will shorten the time between submission and publication. Poorly prepared and unnecessarily lengthy manuscripts have less chance of being accepted.
If you encounter any difficulties, or you have any queries, please contact the EDITOR( 09424532372)

Revised Manuscript
Please include a detailed explanation of your responses to the referees´ comments and also submit a copy of the revised manuscript with the changes highlighted.

Reprints
The corresponding author(s) will be sent a PDF of their paper on publication. The use of the PDF copy is subject to the

Questions and correspondence
For any submission, assessment, or production matters, please contact:
EDITOR
International Journal of Chemical and Analytical Science (IJCAS)

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
The submission file is in Microsoft Word, RTF, or WordPerfect document file format.
Where available, URLs for the references have been provided.
The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.

Copyright Notice

International Journal of Chemical and Analytical Science

C/O Santosh Stone Wale Ka Makan

Near Kumawat Dharamsala

Nurshing Pura Road

Ramtekari

Mandsaur-458001

Madhya Pradesh

Dear Ma'am,

Sub: Submission of an original paper with copyright agreement and authorship responsibility ( submit by e-mail only)

Topic entitled:

I certify that I have participated sufficiently in the conception and design of this work and the analysis of the data (wherever applicable), as well as the writing of the manuscript, to take public responsibility for it. I believe the manuscript represents valid work. I have reviewed the final version of the manuscript and approve it for publication. Neither has the manuscript nor one with substantially similar content under my authorship been published or is being considered for publication elsewhere, except as described in an attachment. Furthermore I attest that I shall produce the data upon which the manuscript is based for examination by the editors or their assignees, if requested.

Kindly find it suitable to publish in your esteemed journal.

Thanking you

Yours sincerely,

Author name and address Signature

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

Author Fees

This journal charges the following author fees.

Article Submission: 0.00 (INR)
Authors are required to pay an Article Submission Fee as part of the submission process to contribute to review costs.

Fast-Track Review: 0.00 (INR)
With the payment of this fee, the review, editorial decision, and author notification on this manuscript is guaranteed to take place within 4 weeks.

Article Publication: 1500.00 (INR)
If this paper is accepted for publication, you will be asked to pay an Article Publication Fee to cover publications costs.